作　　者： ; ; ;

机构地区： 东华大学纺织学院

出　　处： 《塑料工业》 2003年第8期32-34,共3页

摘　　要： 研究了玻纤毡增强热塑性复合材料 (GMT)流动成型过程中模腔压力和材料流动方向对制品力学性能和纤维取向的影响。研究表明 :随着压力提高 ,弯曲强度和模量同步增加 ;但压力超过 18MPa后 ,性能变化不明显。随布料面积分数减小 ,单轴拉伸流动成型将导致沿流动方向和垂直流动方向强度及模量差异变大 ,纤维取向严重 ;但双轴拉伸流动成型得到的制品各方向性能较均匀 。 The effects of mold pressure and material flow direction on the mechanical properties and fiber orientation of the part in glass mat thermoplastics(GMT)flow molding were studied The results showed the flexural strength and modulus increased with the increase of the molding pressure,but increased a little when the pressure was beyond 18 MPa When the blank area fraction decreased,unidirectional extensional flow molding led to a greater difference of the strength and modulus along and transverse to the flow direction, and fibers oriented more obviously The properties of the part made from biaxial extensional flow molding were uniform in two directions,exhibiting isotropic characteristic

关 键 词： 操作参数 玻纤毡增强复合材料 流动成型 纤维分布 聚丙烯 汽车工业 工程材料

领　　域： [化学工程] [化学工程] [一般工业技术] [机械工程] [交通运输工程] [交通运输工程]