作　　者： ; ; ; ;

机构地区： 四川大学高分子科学与工程学院

出　　处： 《塑料工业》 2003年第6期30-32,共3页

摘　　要： 利用同一副模具上有熔池和无熔池实验样条 ,在振动实验机上进行振动注射实验 ,低频振动下有熔池和无熔池样条在振动注射成型时 ,其拉伸屈服强度是不同的 ,增加熔池 ,聚合物的拉伸屈服强度有较大提高。振动频率存在一个最佳值 ,超过此值后 ,拉伸屈服强度会逐渐走低并接近无振动状态下的拉伸屈服强度。 With the same mold in vibration experiment machine, the comparison between the melt cavity molded parts and the non melt cavity molded parts was made, and the data of the tests were analyzed It was concluded that the strength of the melt cavity molded parts was different from that of the non melt cavity molded parts on low frequency vibration field The strength of the melt cavity molded parts was higher than that of non melt cavity molded parts, There was an optimam for the vibration frequency,and when the frequency was higher than the optimam,the tensile stess at yield would decrease gradually to the level at no vibration

关 键 词： 聚合物 振动注射成型 熔池增强方法 拉伸屈服强度 聚乙烯

领　　域： [化学工程]