作　　者： ; ; ; ; (周春晖）;

机构地区： 华南理工大学轻工与食品学院制浆造纸工程国家重点实验室

出　　处： 《力学与实践》 2003年第1期16-19,共4页

摘　　要： 分析了纸浆的物性参数对两相流动模拟的影响,这些物性参数主要包括浆流种类、纤维的尺寸等参数,通过Phoen-ics软件的模拟得出结论,对于同类型的纸浆而言,随着浓度的增大,流体的速度梯度增大,剪切应力增大,径向浓度差增大;对于不同类型的纸浆,木浆的剪切应力大于同样浓度草浆的剪切应力;管道中浓度分布呈中心高,壁面低的单调递减趋势,很不均匀;对于不同类型的纸浆,草浆的径向浓度差小于木浆的径向浓度差. In this paper, the material parameters of fibre suspensions (kind and dimension of the fibre) show an important influence upon turbulence. According to a simulation by the Phoenics software, we can draw the following conclusions: the velocity gradients increase with the concentration for the same kind of pulp suspension, and at the same time, the shear stress and the difference of the radial concentrations increase; for the different kind of pulp suspension, the shear stress of the wood pulp sus- pension is higher than that of the straw pulp suspension in the same concentration; the concentration of the pulp suspension is higher in the center, and lower at the wall surface, decreasing monotonously; the difference of the radial concentrations of the straw pulp suspension is smaller than that of the wood pulp suspension.

关 键 词： 纸浆纤维悬浮液 物性参数 流动特性 两相流 软件

领　　域： [理学] [理学]