作　　者： ; ; ; ; ;

机构地区： 装甲兵工程学院装备再制造工程系装备再制造技术国防科技重点实验室

出　　处： 《中国表面工程》 2003年第2期1-4,9,共5页

摘　　要： 提出了高速电弧喷涂(HVAS)雾化过程熔滴的热传输理论模型,并用一种Fe-Al合金进行数值分析.结果表明,雾化过程中熔滴的液态冷却速度在105~107K@s-1数量级,预示涂层将具有快速凝固组织特征;熔滴尺寸、雾化气流初始速度、熔滴过热度及喷涂距离对雾化熔滴的热传输行为均有很大的影响;在一定范围内增大雾化气流压力,增大熔滴过热度,缩短喷涂距离,可以有效地改善高速电弧喷涂层的性能. The heat transfer model of atomized droplets during high velocity arc spraying (HVAS) was proposed. The variations of several important processing parameters for a Fe-Al alloy spraying, such as flight velocity, temperature profile, solid fraction and cooling rate of the droplets were analyzed. The results showed that the cooling rate of different size droplets ranged from 105Ks-1 to 107Ks-1, possessing the characteristic of rapid solidification. The droplet size, initial velocity of gas flow, superheat degree and spray distance all have great influences on the heat transfer behavior of atomized droplets. The properties of HVAS coatings may be improved by increasing atomization gas pressure and superheat of droplets, as well as decreasing spray distance in certain ranges..

关 键 词： 高速电弧喷涂 雾化熔滴 热传输 数值分析

领　　域： [金属学及工艺] [金属学及工艺]