帮助 本站公告
您现在所在的位置:网站首页 > 知识中心 > 文献详情
文献详细Journal detailed

螺带型搅拌槽内异物性液体的混合性能
Mixing of Liquids with Different Viscosities and Densities in a Helical Ribbon Impeller Stirred Tank

作  者: ; ; ;

机构地区: 华东理工大学化工学院化学工程联合国家重点实验室

出  处: 《过程工程学报》 2013年第4期548-554,共7页

摘  要: 针对高固含量木质纤维素同步糖化与发酵生产燃料乙醇过程,研究了螺带型搅拌槽内层流流动条件下少量低粘低密度液体(a)加入大量高粘高密度主体液体(b)中的混合性能,考察了转速、两种液体体积比(V_a/V_b)、粘度比(μ_b/μ_a)、密度差等影响因素.结果表明,当V_a/V_b〉1%时,异物性物系混合时间远高于相同物性液体混合时间,可延长2~5倍:V_a/V_b对混合时间影响最显著,V_a/V_b=0.2%~3.7%范围内,无量纲混合时间Nt_m随体积比增大先降低后升高存在一最小值;当V_a/V_b≥2%,单位主体液体密度之差Δρ/ρ_b〉0.2时,Nt_m随着V_a/V_b,Δρ/ρ_o增加线性增大;Nt_m随着μ_b/μ_a增大而减小;加入相加在主体液体内所得混合时间比加在液体表面时短;V_a/V_b〉2%时,混合工况可分为Re数控制区(桨叶控制)及Ri数控制区(重力控制). The mixing of liquid addition in a stirred tank installed with a helical ribbon impeller under laminar flow regimes during inoculation in the simultaneous saccharification and fermentation of lignocellulosic biomass at high solids loading was studied. The effects of impeller rotational speed, volume ratio of added liquid a to bulk liquid b, VJVb, and their viscosity and density on mixing time, tin, were examined. The results show that it takes longer time for the liquids with different viscosities and densities to get homogenization than that of similar property liquids when Va/Vb is above 1%. tm of the liquids with different properties is 2~5 times longer than that of similar property liquids at identical conditions. VJVb is the most important operating parameter, dimensionless mixing time, Ntm, first decreases and then increases with VJVb, there is a minimum value. When VJVb〉〉-2% and Ap/pb〉0.2, Ntm increases linearly with them. Liquid addition in the bulk has shorter mixing time than that of addition on the surface. The mixing regime in the tank can be classified into Re controlled (stirrer controlled) regime and Ri controlled (gravity controlled) regime at high VJVb (〉2%).

关 键 词: 螺带桨 搅拌槽 密度差 粘度差 混合时间

领  域: [化学工程]

相关作者

作者 罗彦军
作者 范琳琳

相关机构对象

机构 中山大学
机构 暨南大学新闻与传播学院

相关领域作者

作者 余琳
作者 刘洋
作者 何慧
作者 危旭芳
作者 张振刚