作　　者： ; ; ; ; ;

机构地区： 华中科技大学机械科学与工程学院数字制造与装备技术国家重点实验室

出　　处： 《振动与冲击》 2013年第6期24-28,共5页

摘　　要： 倒装芯片技术逐渐成为微电子封装的主流技术之一,而其中的缺陷检测也日益受到关注。文章针对倒装芯片中典型的焊球缺失缺陷开展研究,以倒装芯片振动模型为基础,推导出芯片振动方程,阐述了缺陷对振动的影响以及利用模态分析进行倒装芯片缺陷检测的原理,并结合实际芯片,理论计算出焊球缺失对其固有频率变化的影响,进一步对正常和焊球缺失芯片的固有频率变化进行了仿真分析和实验测量,研究结果验证了理论计算固有频率变化的正确性,表明基于模态分析的方法可用于倒装芯片的缺陷检测研究。 Flip chip is becoming one of the mainstream technologies in microelectronic packaging, and the quality inspection of flip chip is being gained more and more attention. The solder bump missing, a typical defect in flip chip, was concerned. The vibration equation of flip chip was deduced based on a special vibration model. The influence of defects on the vibration response was described, and the principle of defects inspection for flip chip using modal analysis was presented. The influence of solder bumping missing on the variation of natural frequencies of flip chip used in experiments was calculated. Then, the shifting of the natural frequencies of the referencial flip chip and flip chips containing defects was numerically simulated and also measured in experiments. The results validate the correctness of the analytic model, indicating that the solder bump missing of flip chip can be detected using modal analysis, and the inspection technique can be satisfactoryly used to detect defects of flip chips.

关 键 词： 倒装芯片 缺陷检测 焊球缺失 振动模型 模态分析 固有频率

领　　域： [机械工程]