作　　者： ; ; ; ; ;

机构地区： 东莞理工学院

出　　处： 《工程热物理学报》 2013年第3期513-516,共4页

摘　　要： 高温蓄热是太阳能热发电、高温热利用等的重要组成部分。本文建立了熔盐球形填充床相变蓄热系统的传热模型,采用导热油作为传热流体介质,亚硝酸钠作为高温相变蓄热材料密封于不锈钢球中,利用数值计算方法对相变蓄热过程中的传热特性进行了研究,对蓄热时间、流体进口温度、进口速度、相变材料潜热值对蓄热性能的影响进行了分析。开展了熔盐球形填充床潜热蓄热系统在特定工况下的实验研究,对蓄热系统进行了整体性能测试。结果表明实验值和数值计算值的变化趋势基本保持一致,可为蓄热系统的设计提供理论和实验依据。 High-temperature thermal storage is an important part for solar thermal power generation and high-temperature thermal utilization. The heat transfer model of high-temperature molten salt spherical packed bed latent storage system was established using the heat transfer oil as the heat transfer fluid and sodium nitrite as high temperature phase change material sealed in a stainless steel ball. The heat transfer characteristics during the phase change process were analyzed using the numerical simulation method. The charging time, inlet temperature and inlet velocity of heat transfer fluid and latent heat value of phase change material which affect the performance of latent storage systeln were analyzed. The experimental study about the high-temperature molten salt spherical packed bed latent storage system in specific condition was carried out and the overall performance of the thermal storage system was tested. The results show that the trend of the experimental data and numerical calculation values are basically consistent, which can provide theoretical and experimental basis for the design of thermal storage system.

关 键 词： 高温蓄热 熔盐 热性能 相变材料

领　　域： [动力工程及工程热物理]