作　　者： ; ;

机构地区： 深圳大学光电工程学院光电子器件与系统教育部重点实验室

出　　处： 《光子学报》 2010年第8期1409-1412,共4页

摘　　要： 基于器件模拟仿真,设计了一种PNP型1.5μm波长多量子阱InGaAsP-InP异质结晶体管激光器材料外延结构,并采用金属有机化学气相沉积外延生长.其中基区采用N型Si掺杂.因为扩散系数小,比较P型Zn搀杂具有较高的稳定性,因而较NPN结构外延材料容易获得高质量的光学有源区.由于N型欧姆接触比P型容易获得,基区搀杂浓度可以相对较低,有利于减小基区光损耗和载流子复合,从而获得较低的阈值电流和较高的输出光功率.所获得的外延材料呈现较高光-荧光谱峰值和65.1nm较低半峰宽.测试结果显示了较高的外延片光学质量. Based on device simulation,an epitaxy structure with silicon doped base of a PNP InGaAsP-InP MQW transistor laser（HBTL） at 1 550 nm is designed and realized by MOCVD.Due to its much smaller diffusion coefficient and shorter diffusion length compared to the P dopant in the NPN HBTL,silicon as N dopant in the base perform with higher stability.Therefore,the active material with higher optical quality of PNP HBTL can be obtained easier than that of NPN HBTL.In addition,B type Ohmic contact can be realized easier than P type.The N doping density can be reduced compared to NPN HBTL benefiting to reducing both the optical loss and carrier recombination in the base.And therefore,both the lower threshold and higher stimulation power of the HBTL can be obtained.The result of PL spectrum measurement of the epitaxied material shows high peak intensity and as narrow as 65.1 nm FWHM which demonstrates good optical quality of the material.

关 键 词： 异质结 晶体管激光器 外延结构 掺杂扩散 量子阱退化

领　　域： [电子电信]