作　　者： ; ; ;

机构地区： 华东理工大学化工学院化学工程联合国家重点实验室

出　　处： 《化学反应工程与工艺》 2009年第1期23-28,共6页

摘　　要： 在塔径786 mm和高径比1.5的浅层鼓泡塔内,研究了气体分布器结构对混合时间的影响。实验中选用的气体分布器为单管和不同分布形式的四管分布器,表观气速为0.014～0.2 00 m/s,采用电导脉冲法沿轴向不同位置测定了液体混合时间。结果表明,单管分布器气含率较四管分布器要小;四管分布器的通气管分布形式对混合时间有很大影响,当分布环直径与塔径比(d/D_T)为0.25时,混合时间最短;当d/D_T为0.55时,混合时间最长;而d/D_T为0.37和0.75时介于两者之间,数值与单管接近。并采用多级循环模型分析计算了不同操作条件下的模型参数一级数S和级间质量交换速率uB,预测的混合时间与实验结果吻合较好。 Effect of different gas sparger types on mixing time were investigated in a shallow bubble column with diameter 786 mm and ratio of height to diameter 1.5. Single nozzle sparger and 4-nozzle spargers with different distribution structure were used as gas distributors. Superfical gas velocity was varied from 0. 014 to 0. 200 m/s. The Mixing time were measured using a salt pulse technique at different axial locations above the distributor level. It was found that the gas holdups were higher with 4-nozzle spargers than that with single nozzle sparger. Mixing time was greatly effected by the distribution structures of 4-nozzle sparger. The mixing time was shortest when the ratio of sparger rings diameter to column diameter （d/DT） of 4-nozzle sparger was 0. 25, however, the mixing time was longest when the ratio of sparger ring＇s diameter to column diameter （d/DT） of 4-nozzle sparger was 0.55. In addition, the circulation cell model was used to explain the variation in mixing time of 4-nozzle spargers in the shallow bubble column, and the model parameter values -- cell number S and mass exchange rate between cells UB under different operation conditions were obtained.

关 键 词： 浅层鼓泡塔 气体分布器 气含率 混合时间 多级循环模型

领　　域： [化学工程]