机构地区: 华南理工大学机械与汽车工程学院
出 处: 《焊接学报》 2007年第3期5-8,共4页
摘 要: 将CAN(局域控制网)总线技术、软开关技术、脉冲焊技术等有机地结合,研制了结构紧凑、一体化、协同控制的TANDEM型双丝焊装备。在深入分析双丝焊工艺要求的基础上,引入新型双闭环控制模式,实现了适合双丝焊要求的脉冲焊电源动特性、外特性。为减少双丝焊电弧之间的干扰,将CAN总线技术成功应用于双丝焊装备的通信控制中,设计了双丝焊装备的协同控制装置。结果表明,电源各项电气性能都满足了设计要求,且焊接过程稳定、飞溅小、焊缝成形好、焊接速度快、热输入小、变形小,突出显示了双丝高速焊的优点。 By combining the CAN(controller area network) bus technology,soft-switching technology,pulsed welding technology ect.,a compacted,integrative and synergic controlled tandem equipment is designed.Based on analysis of the technology requirements of twin-wire welding,the novel double-closed-loop control mode is introduced in which realizes the dynamic characteristic and external characteristic suitable for double-wire welding.In order to decrease the interference between two arcs,the CAN bus technology is applied in the communication of the twin-wire welding equipment and a synergic control device is designed.Experiments show that all the electric performance meet the design requirements,and the merits of the twin-wire high-speed welding are stable welding process,little splash,perfect weld appearace,high welding speed,little thermal input and small deformation.
关 键 词: 双丝焊 双闭环控制 局域控制网总线 软开关 协同控制
领 域: [金属学及工艺]