机构地区: 华南理工大学材料科学与工程学院特种功能材料教育部重点实验室
出 处: 《混凝土与水泥制品》 2006年第4期1-4,共4页
摘 要: 研究了电化学除盐过程中通电量、电解质溶液的性质等对驱除Cl-效率的影响,并利用压汞试验方法(MIP)对经电化学脱盐处理的混凝土孔结构进行了分析。结果表明,经电化学除盐后钢筋附近混凝土的总孔隙率增大,其中小于30nm的孔明显增多,而大孔数量则有所减少;远离钢筋的混凝土的孔隙率变化与所用电解质溶液有关,以水作除盐介质时孔隙率增大,而采用饱和Ca(OH)2和饱和Ca(OH)2+0.001mol/L Li2B4O7溶液时混凝土孔隙率减少。 The influences of desalination parameters such as electric current density and types of electrolytes on the efficiency of chloride extraction are studied. And through the Mercury Intrusion Porosimetry's method, the pore size distribution is analysed after ECE. The rezults show that, the porosity of mortar adjacent to the steel bar is increased, and the pores became smaller and more frequent. However, the changes of mortar porosity at the external concrete are correlated with the type of electrolytes to be used. An increase of porosity was discovered in distilled water treated sample, and a decrease exists in saturated aqueous Ca(OH)2 and saturated Ca (OH)2&0.001mol/L Li2B4O7 treated samples.
关 键 词: 电化学除盐 混凝土 孔结构 压汞法 钢筋混凝土
领 域: [水利工程]