机构地区: 中国林业科学研究院林产化学工业研究所
出 处: 《林产化学与工业》 2006年第1期53-56,共4页
摘 要: 通过比较5种大孔吸附树脂对印楝素A的吸附率和解吸率,成功地筛选出比较理想的树脂。研究结果表明:XAD-1180树脂对印楝素A有较好的吸附和解吸效果。并对其动态吸附、解吸性能进行了考察,发现较佳的吸附条件为:印楝素A质量浓度2.23mg/mL(溶剂为30%甲醇-水溶液,以下同),流速1BV/h,饱和吸附量4.5—5BV;解吸条件为:以50%、60%、70%的甲醇-水溶液梯度洗脱。一次提纯产品的纯度为85.14%,经过二次提纯的纯度可达93.18%。纯化产物经HPLC-MS进一步确认为印楝素A。 Five types of macroporous resin were studied in order to compare their performances in absorbing and desorbing azadirachtin A. XAD-1180 was considered as the optimal macroporous resin for azadirachtin A. The dynamic adsorption and desorption conditions for purification of azadirachtin A were studied. The appropriate adsorption conditions were: concentration of azadirachtin A 2 mg/mL in 30% methanol solution, flow rate 1 BV/h, amount of saturated adsorption toward azadirachtin A 4 - 5 BV. The desorption conditions were: gradient elution with 50%, 60% and 70% methanol solution at flow rates 1 and 0. 5 BV/h. The purity of azadirachtin A purified by XAD-1180 for one time was 85.15%. Its purity was 93.1% when purified twice. The purified product was further confirmed to be azadirachtin A by HPLC-MS.
领 域: [化学工程]