作　　者： ; ;

机构地区： 华南理工大学机械与汽车工程学院

出　　处： 《电镀与环保》 2005年第3期19-22,共4页

摘　　要： 通过不同的化学镀工艺配方,获得了4种不同钨含量的化学镀Ni W P三元合金镀层。研究了钨含量对镀层结构、硬度及在5%H2SO4溶液中耐蚀性的影响规律。研究发现,化学镀Ni W P三元合金镀层的结构受镀层中钨含量的影响较大,非晶态Ni W P三元合金镀层所需磷含量较非晶态Ni P二元镀层所需磷含量要低,并且钨含量越高,所需磷含量越少;镀层硬度随镀层结构从非晶态→混晶态→纳米晶态转变而增加;镀层的耐蚀性随镀层中钨含量增加而变好,且非晶态镀层较混晶态和纳米晶态镀层更易形成钝化区。 Four ternary Ni-W-P alloy coatings with different W contents are obtained by four different formulations of electroless Ni-W-P plating bath. The effects of W content on the structure, hardness and corrosion resistance in 5% sulfuric acid solution are investigated. It is found that the structure of the ternary electroless Ni-W-P coating is greatly influenced by W content in the deposit. It is also found that the requisite content of phosphorus for amorphous Ni-W-P structure is less than that of Ni-P binary alloy coating, and the more tungsten exists, the less phosphorus is required. The hardness of the deposits will be enhanced as the deposit structures are changed from amorphous to mix-or nanocrystalline structures. The corrosion resistance of Ni-W-P ternary alloy is improved as W content increased, and the passivation of amorphous deposits is formed more easily than that of mix-structure and nanocrystalline deposits.

关 键 词： 镀层结构 合金 化学镀 溶液 性能 合金镀层 钨含量 非晶态镀层 磷含量 工艺配方 影响规律 镀层硬度 耐蚀性 三元 钝化区 纳米

领　　域： [化学工程] [金属学及工艺] [一般工业技术] [金属学及工艺]